Price: $180.00
(as of Sep 24,2023 03:52:27 UTC – Details)
Specification
Material: Copper, Aluminum Alloy, Diamond Alloy, Nylon
Model: K1331
Plug: US Standard
Voltage Frequency: 110V, 50/60HZ
Saw Blade Specification: 133*20*4.5 mm/5.2*0.79*0.18in
Maximum Sawing Depth: 41 mm/1.6in
Maximum Sawing Width: 42mm/1.65in
Power Cord Length: 3 m/9.8ft
Rated Power: 3000W
Maximum Load Power: 4800W
No-load Speed: 6500rpm
Dust-absorbing Hose Length: about 3 m/9.8ft
Handle Length: 17cm/6.69in
Product Size(L*H): 45*14cm/17.72*5.51in
Package Size: 55*32*22cm/21.7*12.6*8.7in
Gross Weight: 10.34kg/22.8 lbs
Package Included
1* Electric Wall Groove Cutting Machine(With Leakage Protector)
1* Water Pump
1* Dust-absorbing Hose
5* Blades(Four Preinstalled)
1* Carrying Case
1* English Manual
All Accessories for Use
Notes:
1.The maximum diameter of the blade that can be installed is 133 mm, and up to 7 pieces can be installed at a time.
2.When using water grooving, please keep the head down to avoid water entering the body of the machine. When using a vacuum cleaner for slotting, when the bottom plate is adjusted to the bottom position, please put the front protective cover completely against the wall or floor, to achieve the maximum effect of vacuuming.
3.Please check the carbon brush condition regularly, it is generally recommended to replace the carbon brush once in 80 hours of use. When the spark is large, also need to replace the carbon brush in time.
4.When cleaning the machine head, please avoid water entering the machine body through the ventilation hole.
【Excellent Performance】: This machine is equipped with a 4800W all-copper motor that spins at up to 6500rpm, providing powerful grooving power. In addition, the machine is equipped with reinforced, high-hardness diamond alloy blades that are heat resistant, sharp, and durable to cut hard objects with ease.
【Adjustable Depth and Width】: You can adjust the base plate to adjust the depth of the cut as well as change the number of blades according to different needs as a way to adjust the width of the cut.
【Two-stage Deceleration Design】: It uses two different sets of gears for deceleration to reduce the speed of the high-speed active shaft to the desired output speed. Compared with single-stage reduction, it has a higher reduction ratio, larger torque output, and better stability, which is suitable for high load and heavy-duty working conditions, improving transmission efficiency and service life.
【Precise Grooving】: It uses infrared sighting to reduce work errors and improve efficiency so that your cutting can be done in one go.
